This step is normal because there is no bootloader yet on your SSD. In OpenCore bootloader, choose to boot on your newly installed macOS drive. Select OK and, again, boot on your USB flash drive. When the installation is over and the laptop reboots, it will probably give you an error at boot (Default Boot Device Missing or Boot Failed).I plugged the flash drive in the USB3 port. You must press F12 for this Acer laptop at boot to select USB flash drive.Later we will add a VoodooI2C which will give us smooth trackpad experience, but for now you'll need to use this (Trackpad works kinda jerky with it), it will be better to connect external mouse If you wouldn't have this, keyboard wouldn't work.Don't forget to put them in the ist too, or download mine. This is not a subject of this guide, you can either do this by copying the latest release of my repository to the EFI partition of the USB drive or installing everything manually.Īfter this, we will have to put some important kexts in the flash drive's EFI partition in folder EFI/OC/Kexts. Then, you'll have to instal OpenCore bootloader on your flash drive. Sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia -volume /Volumes/*YOUR FLASH DRIVE NAME* -applicationpath /Applications/Install\ macOS\ Mojave.app You may check it here, but in short, you need to format your flash drive to GUID partition table and JHFS+ filesystem, download latest installer from Mac App Store and rewrite your flash drive by that command I decided to prepare Installer with "createinstallmedia" method. There are plenty of methods, the one of popular ones is UniBeast, but it required internet connection on install, and it was a no-go for me. You'll need to make a bootable USB drive with macOS installer. Set Supervisor Password in Security tab (needed to deactivate Secure Boot). Once the update is done, go in your BIOS setup. Install latest BIOS with fixes for your laptop, it can be found in "Support" tab on official Acer website (I have 1.05 at the moment) Updating BIOS to the latest version and BIOS configuration Replace SSD (stock one may or may not work fine, you should note that it can cause kernel panics).I've installed DW1560 which is based on Broadcom BCM94352Z, all is working great.I had kernel panics with Intel 660p, I don't know if it works now, but 10.13.4 and lower certainly had problems with it. It's detected but it is useless (can't authenticate on lockscreen or in password manager), so I decided to disable that port (I got shitloads of BiometricKit errors).Tested with 10.13.4 (max brightness, 720p on safari, USB wifi dongle).If you disable the wifi with Acer's keyboard shortcut (Fn+F3) and go to sleep, wifi won't be able to be enable.To my knowledge, no weird things after sleep/wake.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |